3d-robotics Remzibi’s OSD 3DR Manual do Utilizador descarregar pdf

Remzibi’s OSD 3DR (with DIY Drones version firmware)

This tutorial is intended to be used with Happy Killmore’s manual (link). This tutorial will cover how to

assemble your Remzibi’s OSD 3DR, and will cover the basic differences in hardware features between

the Original Remzibi’s OSD and the Remzibi’s OSD 3DR with DIY Drones version firmware – including the

Status LED and how to switch between modes – which you will need to following Happy Killmore’s

manual.

What your Remzibi’s OSD 3DR comes with:

 Pins: all of the pins you will need to solder onto the board:

o (1) 3x8 header pins

o (1) 1x20 header pins

o (1) 3x2 header pins

o (1) battery adapter

 DIY Drones Remzibi’s OSD cable: It's an FTDI cable, but with a 4-pin female header instead of

the usual 6-pin (this was done to keep compatibility with the OTI cable that the original Remzibi

used). You can also use your standard FTDI cable, but you will have to use some extra wires to

make the required connections. This will be covered later in the tutorial.

You will also need:

 GPS Any GPS that uses serial can be used. In this tutorial, I will be using the MediaTek GPS with

basic adapter offered at the DIY Drones store here.

Important note: the DIY Drones Mediatek GPS comes with custom DIY Drones firmware

and must be programmed with the factory default firmware to work with the Remzibi’s OSD.

Updating the firmware is simple to do, and instructions for how to do this will be covered later

in this tutorial.

1 2 3 4 5 6 ... 13 14

Resumo do Conteúdo

Página 1

Remzibi’s OSD 3DR (with DIY Drones version firmware) This tutorial is intended to be used with Happy Killmore’s manual (link). This tutorial will cove

Página 2

Connecting your Remzibi’s OSD 3DR to your computer The Remzibi’s OSD 3DR is connected to your computer using the DIY Drones Remzibi’s OSD cable. Black

Página 3 - Assembling Remzibi’s OSD 3DR

switch the mode. When the board is in programming mode, the blue LED will be solid. If the Remzibi’s OSD 3DR board’s video output is hooked up to

Página 4

Testing the Serial Connection Connect your Remzibi’s OSD 3DR to your computer (see the “Connecting your Remzibi’s OSD 3DR to your computer” secti

Página 5

Updating Firmware Your Remzibi’s OSD 3DR comes with the latest DIY Drones version of the firmware, and character set already loaded. We recommend usi

Página 6

This concludes the Remzibi’s OSD 3DR tutorial. Thank you for reading! Please send any feedback regarding this tutorial to Carmen at [email protected]

Página 7 - DIY Drones Mediatek GPS

 Video Camera and transmitter/receiver check out rcgroups.com for more information on video transmitters and receivers, and to learn more about FPV

Página 8

Important Revision Note: The release version of the Remzibi’s OSD 3DR, has an error on the silk screen label on the back side of the board: the si

Página 9 - Battery

Here I have all of the pins cut and set next to the pads I will be soldering them to on the Remzibi board: Carefully solder the pins onto the board.

Página 10 - Remzibi’s OSD 3DR Cable

Soldering a Connector for Your Battery If you’re using a connector for your battery that is not compatible with the connector that comes with the Remz

Página 11

This concludes the Assembly portion of the tutorial! Next: How to flash your DIY Drones Mediatek GPS with the factory firmware! Female Connec

Página 12

DIY Drones Mediatek GPS The DIY Drones Mediatek GPS comes with custom DIY Drones firmware for use with the ArduPilot Mega system. To use the Media

Página 13

Uploading the Firmware Download the firmware update utility found here and unzip the file. Download the factory default firmware found

Página 14

Powering the Board Remzibi’s OSD 3DR must be powered externally with 12V. To power your board, just plug your 12V battery into the P

Comentários a estes Manuais

Sem comentários

3d-robotics Remzibi’s OSD 3DR Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware 3d-robotics Remzibi’s OSD 3DR. 3D Robotics Remzibi’s OSD 3DR User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware 3d-robotics Remzibi’s OSD 3DR